Pull cord switch
A1V0005
- 1NO + 1NC snap action (B5)
- Complete with stainless steel bracket for ceiling fixing, rope and knob
- Cable gland M20
- Degree of protection IP65
- Operating temperature -35 ° C + 80 ° C
Automation parts
Designed to be connected to our automations but also to third-party automations after careful compatibility check
-
-
A1V0011 PNP photocells +...
A1V0011- Infrared barrier up to 15 meters, composed of compact sensors with incorporated electronics
- Cable length 15m
- Power supply 10-30 Vdc
- PNP NO output
- Operating temperature -25 + 50 ° C
- Degree of protection IP 67
- Complete with cable gland and connector for connection to the electrical panel.
-
MOBILE reflection photocells
A1V0014- Reflection infrared barrier with reflector up to 6 meters, composed of compact sensor with incorporated electronics with M12 plug
- Sensitivity adjustable from 0.5 to 6m
- Power supply 10-30 Vdc
- PNP NO + NC output
- Operating temperature -25 + 50 ° C
- Degree of protection IP 67
- Complete with 80mm diameter reflector, 10m connection cable with M12 plug and AISI-304 stainless steel brackets
-
FIXED reflection photocell kit
A1V0015- Reflection infrared barrier with reflector up to 6 meters, composed of compact sensor with incorporated electronics with M12 plug
- Sensitivity adjustable from 0.5 to 6m
- Power supply 10-30 Vdc
- PNP NO + NC output
- Operating temperature -25 + 50 ° C
- Degree of protection IP 67
- Complete with 55x125mm reflector, 10m connection cable with M12 plug and AISI-304 stainless steel brackets
-
Buffer batteries
A1V0016- Kit for the operation of the automation in the event of a black out, it consists of a container for the battery pack and a battery charger board to be installed on the A1X21F5 board
- 2 12V 3.2 Ah AGM lead gel batteries without maintenance, estimated life 3/5 years
- 25A blade fuse
- Ventilated container in plastic material, complete with cable glands and cables to be connected to the AIX21F5 series electronic board
- Operating temperature -15 + 50 ° C
-
LED beacon
A1V0026- Fixed or flashing LED indicator
- Pure white color
- Multivoltage 12-30 Vdc Vac 20 mA
- 1 Hz flashing frequency
- Operating temperature -25 + 50 ° C
- Degree of protection IP65
- Shell in opal white POM, container in plastic material RAL7035, complete with cable gland and 400mm cable.
-
Remote control 433 MHz kit
A1V0030- The remote control kit consists of a receiver to plug directly into the control unit, without the need for further wiring or connections and a 4-channel remote control
- Ricevitore
- Superheterodyne receiver guarantees high reliability in reception and good operation even in disturbed environments
- 100 memorable remote control codes
- Frequency 433.9 MHz
- Operating temperature -25 + 60 ° C
- Remote control
- 4-channel 12-bit fixed code remote control (1024 combinations) programmable by means of a dip-switch
- Power supply 2 CR2016 lithium batteries
- Radiated power 0.1 mW
- Operating temperature 0 + 60 ° C
-
4-channel 433 MHz remote...
A1V0032- 4-channel 12-bit fixed code remote control (1024 combinations) programmable by means of a dip-switch
- Power supply 2 CR2016 lithium batteries
- Radiated power 0.1 mW
- Operating temperature 0 + 60 ° C