Automation parts

Designed to be connected to our automations but also to third-party automations after careful compatibility check

Active filters

  • SPOT Open sensor
    A1V0045
    • Laser detection sensor (TOF) for door opening command or obstacle detection
    • Operating range from 0.2 to 6 m
    • Activation threshold programmable during learning by simply pressing a button
    • Compact enclosure with integrated electronics, 30mm diameter with length of cable and M8 terminal
    • Power supply 10/30 Vdc 150 mA
    • NO + NC solid state relay output
    • Degree of protection IP67
    • Operating temperature -40 + 60 ° C
    • Complete with 2 m cable with M8 connector, adjustable brackets in AISI-304 stainless steel for wall or ceiling mounting.
  • External pushbutton 1 start
    A1V0051
    • 40mm diameter mushroom pushbutton for door opening command
    • Unstable contact NO
    • Plastic container RAL7035
    • Degree of protection IP65
    • Operating temperature -25 + 70 ° C
    • Including cable gland.
  • External pushbutton 1 start...
    A1V0052
    • 40mm diameter mushroom button for door opening control, unstable NO contact
    • 40mm diameter mushroom button for door STOP command, NC contact with lock
    • Container in RAL7035 plastic material
    • IP65 protection rating
    • Operating temperature -25 +70°C
    • Including cable gland.
  • Radio push button
    A1V0061
    • Wall remote control, 12 bit fixed code (1024 combinations) programmable by dip-switch
    • Frequency 433.9 MHz
    • Power supply 2 CR2016 lithium batteries
    • Radiated power 0.1 mW
    • Operating temperature -25 + 50 ° C
    • Degree of protection IP65
    • Plastic container RAL7035 with fixing slots.
  • Radio pull cord
    A1V0065
    • Cable remote control, 12 bit fixed code (1024 combinations) programmable by dip-switch
    • Frequency 433.9 MHz
    • Power supply 2 CR2016 lithium batteries
    • Radiated power 0.1 mW
    • Operating temperature -25 + 50 ° C
    • Degree of protection IP65
    • Plastic container RAL7035 with fixing slots
    • Complete with rope and knob.
  • Flush-mounted pushbutton 2 DIG
    A1V0202
    • Flush-mounted pushbutton, for total command and control of the automatic door
    • Open button, partial open button and emergency mushroom button
    • Two-digit display for door monitoring and programming
    • 5m cable with industrial connector for door height up to 4m
    • 1 meter long cable for connecting the push button (A1V0051) inside the cold room
    • Degree of protection IP65
    • Operating temperature -25 + 50 ° C
    • Thermoplastic resin material and AISI-304 stainless steel.
  • External pushbutton 2 DIG
    A1V0204
    • Pushbutton, for total command and control of the automatic door
    • Open button, partial open button and emergency mushroom button
    • Two-digit display for door monitoring and programming
    • 5m cable with industrial connector for door height up to 4m
    • Degree of protection IP65
    • Operating temperature -25 + 50 ° C
    • Thermoplastic resin material and AISI-304 stainless steel.
  • End cap for automatic track
    A1X1390
    • Set of accessories to create casings to fully cover the automation, the supply does not include the sheet metal, to be created by the customer based on our design
    • Hinged opening with lock in opening, for easy maintenance
    • Facilitated cable entry thanks to the pre-drilling of the head
    • Brackets, end caps and screws in AISI-304 stainless steel
    • For doors with a width greater than 2400mm it is advisable to install the A1X1373 support bracket in the center