Automation parts

Designed to be connected to our automations but also to third-party automations after careful compatibility check

Active filters

  • 1/2" Z16 Chain motor pinion
    1/2" Z16 Chain motor pinion
    A1X1872
    • Tested chain pinion with high resistance and rust resistance
    • Material PA6 + 30% FG RAL 7039
    • Operating temperature -30 ° + 80° C
  • SW control panel
    Electronic control panel
    A1X2023
    • Electronic control panel to drive the A1X24 series DC motors. A microprocessor controls the entire automation, position, slowdowns and obstacle detection via the encoder signal
    • Power supply 100-240 Vac 400 VA 50/60 Hz
    • Output for flashing light 24Vdc 500mA
    • NO + NC programmable relay output
    • PNP NPN inputs for 2 pairs of photocells
    • NPN inputs for open, pedestrian and stop commands
    • Network input for door interlocking
    • Connector for radio receiver
    • Incremental encoder input
    • Serial connector for control and programming push-button panel
    • Connector for connecting batteries and charging module
    • Power cord with Schuko plug
    • RAL7000 plastic container, complete with cable glands and industrial connector for connecting the push-button panel
    • Fixing plate in AISI-304 stainless steel
    • Degree of protection IP65
    • Operating temperature -25 + 70 ° C
  • Infrared programmer
    Infrared programmer
    A1X2150
    • To program the functions of the control unit at a short distance from the push-button panel
    • CR2032 lithium battery power supply
    • Operating temperature 0 + 60 ° C
  • 24 Vdc mainboard rev. F
    24 Vdc mainboard rev. F AC
    A1X21F4
    • Designed to drive A1X24 series DC motors. A microprocessor controls the entire automation, position, slowdowns and obstacle detection via the encoder signal
    • Power supply 21Vca 25A
    • Output for flashing light 24Vdc 500mA
    • NO + NC programmable relay output
    • PNP NPN inputs for 2 pairs of photocells
    • NPN inputs for open, pedestrian and stop commands
    • Network input for door interlocking
    • Connector for radio receiver
    • Incremental encoder input
    • Serial connector for control and programming push-button panel
    • Connector for connecting batteries and charging module
    • Removable input and output terminals.
  • 24 Vdc mainboard rev. F
    24 Vdc mainboard rev. F SW
    A1X21F5
    • Designed to drive DC motors of the A1X24 series. A microprocessor controls the entire automation, the position, the slowdowns and the detection of obstacles through the encoder signal
    • 24Vdc 25A power supply
    • Output for flashing light 24Vdc 500mA
    • NO + NC programmable relay output
    • PNP NPN inputs for 2 pairs of photocells
    • NPN inputs for open, pedestrian open and stop commands
    • Network input for door interlocking
    • Connector for radio receiver
    • Incremental encoder input
    • Serial connector for control and programming push-button panel
    • Connector for connecting batteries and charging module
    • Removable input and output terminals.
  • 24V DC motor 150W
    24V DC motor 150W
    A1X2455
    • Rated power 150 W 7A 1250 RPM
    • Constructive form 56B14 diameter 83 mm
    • Service factor S3 30%
    • Degree of protection IP65
    • Use temperature -25 + 70 ° C
    • Cables in sheath length. 0.7m
    • Integrated HALL encoder.
  • 24V DC motor 350W
    24V DC motor 350W
    A1X2470
    • Rated power 350 W 16A 1500 RPM
    • Constructive form 71B14 diameter 115 mm
    • Service factor S3 30%
    • Degree of protection IP65
    • Use temperature -25 + 70 ° C
    • Cables in sheath length. 0.7m
    • Integrated HALL encoder.
  • Panel LED beacon
    Panel LED beacon
    A1X4710
    • Fixed or flashing LED indicator
    • Pure white color
    • Multivoltage 12-30 Vdc Vac 20 mA
    • 1 Hz flashing frequency
    • Operating temperature -25 + 50 ° C
    • Degree of protection IP65
    • Shell in opal white POM, complete with ring nut for fixing in hole diameter 22mm, cable gland and 400mm cable.